Search results
592
results
(showing
151
to
160
of
592)
Checklists and methodical pre-flight inspections
only work to ensure safety if they are followed in full
every time.
Last updated: 10 January 2023
Article 2
Provide pilots with checklists, guidance and tutorials on safety best practices.
Last updated: 28 July 2025
. *
H B-S
B-O
multiple N/A labelled packages (with
associated documentation – see
below) that contain errors for
them to snag using the radac
checklists.
8 Dangerous
Goods
transport
documentation
(Shippers
Declaration) and
other relevant
documentation
To be able to complete and/or check all relevant transport documentation and state the requirements for their retention.
Last updated: 30 April 2021
Use written checklists to ensure
you don’t forget any safety-critical checks or
procedures before every fight.
Last updated: 13 September 2023
Recommendation 2003-77
It is recommended that New Piper Aircraft Ltd develop advice on ditching and ditching checklists for inclusion in the
Aircraft Flight Manuals and Pilot Operating Handbooks of the PA-31 and other Piper types.
Last updated: 10 December 2003
This activity will be completed by EASA post-RTS.
7 While reviewing the updated Non-Normal Checklists (NNCs), it was noted some non-normal procedures were not provided in the
AFM as expected (being only available through the Flight Crew Operations Manual, FCOM).
Last updated: 19 October 2021
are used and that the manufacturer’s recommendations with regards to storage and service
lives are complied with;
4) ensure that mechanical consumable parts and standard parts (or parts which have the
appearance of standard parts, e.g. split pins, nuts, bolts etc.) conform to the correct
specifications;
5) establish a policy for the replacement or re-use of elastomers and standard parts during
maintenance and overhaul;
6) establish a policy for component acceptance at overhaul ensuring that, where no
manufacturer’s data is available, wear and corrosion are assessed and recorded in
accordance with standard engineering practices;
7) establish procedures to ensure that repetitive tasks for multi-cylinder piston engines are
carried out without omission (e.g. checklists directly referencing cylinder numbers for
rotating assemblies, crank bearings etc.).
3 Reference Information
3.1 AAIB Bulletin 7/2015, G-RNHF, EW/G2014/07/32
3.2 AAIB Bulletin 9/2017, G-RNHF, EW/C2014
Last updated: 27 February 2018
What procedures/checklists/policies are there to help you manage these situations?
Last updated: 21 September 2026
Implementing Rules (IRs), Acceptable Means of Compliance (AMCs) and Guidance Material (GM) on metabolic and endocrine conditions.
There is a an obesity assessment checklist in the metabolic and endocrinological guidance material, which is an optional resource to support the evaluation.
Last updated: 15 October 2026
(Para 3.6.2)
R13 NATS should review their hierarchy of fallback procedure checklists for completeness,
coherence and consistency, so that they support controllers via an intelligent checklist
architecture that leads intuitively through conditions-based options, including making clear
where the controller has discretion to adjust and refine responses as circumstances dictate or
allow.
Last updated: 18 November 2021
