• Regulation (EU) No. 1321/2014 determines the rules for the continuing airworthiness and maintenance of aircraft subject to EASA regulation. Part M Subpart G of this regulation concerns the management of continuing airworthiness of EASA aircraft.

    Organisations approved to Part M Subpart G can additionally be approved to make recommendations to a competent authority that an Airworthiness Review Certificate (EASA Form 15a) may be issued or in certain cases issue and extend an Airworthiness Review Certificate (EASA Form 15b) under the terms of their approval.

    Part M Subpart G organisations holding the Airworthiness Review privilege may also be approved to issue Permits to Fly in accordance with Part 21 Subpart P when the aircraft is in conformity with the approved Flight Conditions. Please note: this privilege does not allow the Part M Subpart G organisation to approve the Flight Conditions.

    There are two elements of a Part M Subpart G approval:

    1. Those associated with the aircraft registrations listed on the organisation's Air Operators Certificate (AOC) and covering the continuing airworthiness management of commercial air transport (CAT) aircraft.
    2. Those associated with the continuing airworthiness management of aircraft not involved in commercial air transport (non-CAT), as listed on their Part M Subpart G approval certificate.


    Organisations must ensure that both aspects of their approval are changed (the AOC and Part MG).

    Who can apply?

    An organisation with their principal place of business located in the UK that wishes to carry out the management of continuing airworthiness management of EASA aircraft.

    Organisations with their principal place of business located outside the UK, including the Channel Islands, should apply directly to EASA.

    Organisations needing to change a Registered Company or Limited Liability Partnership (LLP) Number will require a new initial approval as it cannot be classed as a change to an existing approval. See CAP 562, Leaflet C-30 for further information.

    If adding an aircraft which falls within a generic aircraft group that you already hold on your approval certificate (e.g. Piston engine aeroplanes – metal structure not exceeding 5700 kg) then you should email an exposition amendment to apply@caa.co.uk or attach/upload the draft exposition to the online application form (where applicable). Please do not send to your surveyor directly as it will delay your application processing.

  • The information below explains how to apply for a Part M Subpart G approval for aircraft listed on your organisation's Air Operators Certificate (AOC):

  • How much does it cost?

    See the Official Record Series 5, CAA Scheme of Charges.

    In the event of a discrepancy between the information here and the Official Record Series 5, CAA Scheme of Charges (Airworthiness, Noise Certification and Aircraft and Aircraft Engine Emissions), the Scheme of Charges takes precedence.

    How long will it take to process my application?

    When A&A receive the recommendation the approval certificates will be raised and sent to your organisation within 20 working days.

    For more details please see the section below titled 'What happens next?'

    How long is it valid for?

    Approvals remain valid unless cancelled, suspended or revoked.

    Once granted an approval requires a recommendation for continuation every 24 months from the date of issue.

    This is raised by the CAA Surveyor following a satisfactory audit programme.


    Your application should be sent to our Flight Operations department in the first instance.  

    • Please refer to the  AOC guidance for details of how to make an application. 

    Flight Operations will inform Applications & Approvals (A&A) once your application has been received. 

    At that stage A&A will supply you with your provisional Part M Subpart G approval number and ask you to send us the following documents;

    • Part M Subpart G Compliance Checklist
    • Draft of the organisations  Continuing Airworthiness Management Exposition (CAME). 
      (Organisations wishing to gain the privilege carry out Airworthiness Reviews in accordance with M.A.711(b) and issue Permits to Fly  in accordance with point M.A.711(c) should include the relevant procedure / supplements in the exposition).
    • A completed organisation internal Audit Report (including objective evidence) to confirm the organisation is complaint and ready for the CAA audit

    • A minimum of one  EASA Form 4 for key personnel i.e. Quality Manager. Additional Form 4's may be requested by your allocated CAA surveyor. Please ensure that the CAA policy on fitness of character is fully understood before submission of an application. Additional Form 4's may be requested by your allocated CAA surveyor. 

    • Draft Technical Log for approval (if applicable)
    • Base Maintenance Contracts and Line Maintenance Contracts (where appropriate) for approval
    • Applications for Maintenance Programme approval
    • Any contracts for continuing airworthiness tasks being carried out by organisations working under the applicants quality system.


    Applications made in association with an Air Operator Certificate (AOC) should be submitted to Flight Operations in the first instance. Guidance on  AOC applications

    More information is available in the section above called 'What do I need to include with my application?'.


    • An e-mail to the applicant to confirm your provisional Part M Subpart G approval number normally within 10 working days.
    • A Technical Support Officer will make an initial assessment of your application and CAME and will contact you with any queries.
    • The Resource Management Team will contact you to arrange for an Airworthiness Surveyor to carry out the on-site audit. Any questions regarding the scheduling of your on site visit can be directed to the Resource Management Team at 01293 573600.
    • An Airworthiness Surveyor will conduct an audit against the requirements and raise an audit report detailing any findings.
    • The Airworthiness Surveyor will review the nominated personnel. Interviews for key personnel may be carried out.
    • The Airworthiness Surveyor will assess the supporting documentation; Technical Logs, Maintenance Contracts (as applicable) and Maintenance Programmes. When able to, the Airworthiness Surveyor will approve the supporting documentation.
    • If findings have been raised the organisation should address the findings and notify the Airworthiness Surveyor of the actions taken.
    • Once any audit findings relating to the initial application have been closed the Airworthiness Surveyor will submit a recommendation to A & A for the issue of the approval.
    • When A&A receive the recommendation the approval certificates will be raised and sent to your organisation within 20 working days.
    • If you have been approved to Issue or Extend ARC's under your Part M Subpart G approval, at this stage we will send you an e-mail containing your ARC Online logon information.
    • On receipt of the certificates, your organisation can begin undertaking and releasing work.