A new technical standard for 'Terrain Awareness & Warning Systems' fitted to helicopters operating offshore (Offshore HTAWS) has been published in Europe and North America. The upgrade will significantly enhance safety levels by increasing the warning time helicopter pilots receive of a potential impact by up to 600 per cent, affording flight crews a much better chance of avoiding accidents. Developed by a joint helicopter industry working group instigated by the UK Civil Aviation Authority (CAA), the new standard can now be adopted by regulators and applied by equipment manufacturers to their products installed in helicopter fleets globally.
In aviation, TAWS are on-board systems aimed at preventing unintentional impacts by airworthy aircraft under pilot control with the ground or sea, known in the industry as controlled flight into terrain accidents, or CFIT.
The initiative began as a response to a number of accidents involving helicopters operating in the North Sea. Subsequent analysis of the HTAWS fitted to helicopters showed that pilots were often being alerted unnecessarily, but then either too late or not at all when an impact actually happened. An earlier joint CAA-industry research project used flight data from normal operations and actual accidents to better define when accidents were likely to happen. Honeywell, the avionics manufacturer involved with the research, was then able to produce a prototype system for further testing in flight simulators, leading to the production of an interim standard which formed the basis of the comprehensive new technical standard.
The new standard has now been published by EUROCAE in Europe and RTCA in the USA and will be adopted by aviation regulators allowing manufacturers to implement the improvements in new products or as modifications to existing equipment.
Dave Howson, Research Project Manager at the CAA, said: “We are delighted to see the publication of the new standard which represents a significant milestone in rolling out this major safety benefit for helicopters flying in difficult conditions, where accidents are more likely to occur.
“This has been a great collaborative effort by regulators and the industry to achieve a real positive outcome, hopefully pointing the way to further joint aviation safety projects in the future.”
The technical standard is available from EUROCAE (ED-285) or RTCA (DO-376)
Provide page feedback
Please enter your comments below, or use our usual service contacts if a specific matter requires an answer.
Fields marked with an asterisk (*) are required.