Yes, the third party is the operator and has to comply with the applicable requirements e.g. Part-ORO, Part-NCC, Part-SPA.
If you are an AOC holder flying non-commercial operations with an aircraft otherwise used for commercial air transport operations, listed in the operations specification of your AOC, then you should refer to ORO.AOC.125. However, if the aircraft is not otherwise used for commercial air transport operations or if it is not listed in the operations specification of your AOC, then you should comply with all the rules as though you are a non-commercial operator e.g. Part-ORO, Part-NCC, Part-SPA.
The international definition of the term 'dangerous goods' in relation to air transport is: 'Articles or substances which are capable of posing a risk to health, safety, property or the environment and which are shown in the list of dangerous goods in [the ICAO Technical] Instructions, or which are classified according to [those] Instructions'. More information can be found at www.caa.co.uk/dangerousgoods and on the ICAO website.
The ICAO Technical Instructions and EASA Part NCC permit passengers and crew to carry a specific list of dangerous goods. These are mainly items that are medical necessities, or that have a low hazard and are consumer items. There are conditions that apply; some may only be carried in the aircraft cabin or on the person, whilst others are permitted in baggage. There are normally quantity limits and some instances when the operator of the aircraft must give specific approval for an item to be carried. Any dangerous goods not permitted by the ICAO Technical Instructions are not to be carried by passengers or crew. NCC.GEN.150(f) requires the aircraft operator to ensure that passengers are provided with information about dangerous goods (i.e. what they may and may not carry and the conditions that apply). Further information is available from us on restricted and banned items or from IATA.
The ICAO Technical Instructions provides for a safe means for many types of dangerous goods to be carried as cargo by specifying how they must be packed, what markings and labels need to be applied to the package, what documentation must be completed and how they must be loaded and secured on the aircraft. In order to carry dangerous goods as cargo, NCC.GEN.150(b) requires the operator of the aircraft to be approved in accordance with Part-SPA, Subpart G.
Yes, ORO.GEN.110(j) requires all operators to establish and maintain dangerous goods training programmes as required by the ICAO Technical Instructions. The Technical Instructions (Part one, Chapter four) requires operators to provide relevant employees with dangerous goods training, whether or not the operator is approved to carry dangerous goods. We provide further information on dangerous goods training.
Flight Crew operating an aircraft under Part-NCC must hold a Part-FCL licence or a validation issued under Annex III
Flight Time Limitation implementing rules for NCC operations have not yet been developed by EASA therefore national FTL rules will be used.
At least one cabin crew member must be assigned for the operation of aircraft with more than 19 seats when carrying one or more passenger(s). See ORO.CC.100.
Cabin crew members should only be assigned to duties on an aircraft if they:
Where a crew member holds a valid cabin crew attestation this can be accepted by an NCC operator and a copy of the attestation should be held on file.
Where a crew member does not hold a valid cabin crew attestation they should complete the training program as specified in Part-CC of the aircrew regulation.
Cabin crew members must also complete the training and checking required by ORO.CC Section 1.
Read all @UK_CAA
Singapore and the United Kingdom commence trials to improve public health safety for air crew
6 July, 2020
Further advice to UK consumers impacted by Flybe entering administration
5 March, 2020
Advice to UK consumers following Flybe entering administration
4 March, 2020
Read all News
Girls in aviation day
22 October, 2018
Tackling crime and improving safety
4 October, 2018
International women in engineering day
22 June, 2017
Read All Blogs